Can new lighting save the Mona Lisa?

Cosmos Magazine


Cosmos is a quarterly science magazine. We aim to inspire curiosity in ‘The Science of Everything’ and make the world of science accessible to everyone.

By Cosmos

File 20181206 128199 1bc3u15. Jpg? Ixlib=rb 1. 1

Lighting causes damage to paintings over time. Credit: Juan Di Nella/Unsplash

Next time you’re in a museum or art gallery, observe each painting a little more closely. You may notice cracks on the surface of the canvas, especially if the painting is very old.

The damage you see is caused by radiant energy striking the painting’s surface – and light (visible radiation) causes irreversible damage to artwork.

However, all is not lost. Our new research shows that optimised smart lighting systems can reduce damage to paintings while preserving their colour appearance.

The dilemma

Damage to artwork by infrared, ultraviolet and visible radiation is well documented. When a photon (an elementary light particle) is absorbed by a pigment in paint, the pigment molecule elevates to a higher energy state. In this excited state, the molecule’s chemical composition changes. This is called a photochemical action.

Viewed from the human perspective, the photochemical action manifests itself as cracks, discolouration, or surface hardening.

File 20181206 128208 h0dq28
Johannes Vermeer painted The Milkmaid in 1660. Credit:

Not surprisingly, daylight, which includes infrared and ultraviolet radiation, is highly damaging to paintings. In museums, it is common practice to use incandescent, and more recently, light emitting diodes (LEDs), to reduce damage.

However, a group of researchers showed that light can cause colour degradation regardless of the lighting technology. Bright yellow colours in Van Gogh’s famous Sunflowers are turning dark brown due to absorption of blue and green light from LEDs. Research on the conservation of artwork makes it look like this is a losing battle.

Of course, you will be right in thinking that the best conservation method would be the complete absence of light. But we need light for visibility and to appreciate the beauty of a painting.

This leaves us with a dilemma of two conflicting parameters: visibility and damage.

Light optimisation

Lighting technology in itself may not be enough to tackle this dilemma. However, the way we use technology can make a difference.

Our approach to address this problem is based on three key facts:

  1. light triggers photochemical actions only when it is absorbed by a pigment
  2. the reflectance factor of a pigment (its effectiveness in reflecting light) determines the amount of light absorption
  3. light output (composition of the light spectrum, and the intensity of the light) of lighting devices, such as LEDs, can be fine-tuned.
File 20181206 128193 1835fm2
Yellow colours are particularly vulnerable to being damaged by light. Credit:

It is possible to measure the reflectance factor of a painting and optimise lighting to reduce absorption. Previous research shows that optimising light to lessen absorption can reduce energy consumption significantly, and with no loss in visual experience. Objects look equally natural and attractive under optimised light sources compared to regular white light sources.{%recommended 8046%}

In this new study, we optimised LEDs for five paintings to reduce light absorption. Using a genetic algorithm (an artificial intelligence technique), we reduced light absorption between 19% and 47%. Besides the benefits for the painting, this method almost halved the energy consumed by lighting.

In addition to increased sustainability and art conservation, the colour quality of the paintings was another parameter in our optimisation process. Colour appearance and brightness of paintings were held constant not to lower the appreciation of the artwork.

This is possible due to a quirk in our visual system. Photoreceptor cone cells, the cells in our retinas which enable human colour vision, are not equally sensitive to the whole visible spectrum.

Different combinations of wavelength and intensity can result in identical signals in our brain. This understanding gives us the flexibility of using different light sources to facilitate identical colour appearances.

This smart lighting system requires scanning of the artwork to obtain colour information. Then, a precise projection system emits optimised lighting to the painting.

This method offers a solution to extend the lifetime of works of art, such as the world-famous Mona Lisa, without leaving them in the dark.The conversation

Dorukalp Durmus, Honorary Associate, University of Sydney

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Please login to favourite this article.